1. Hard Wire input for "Arming" the device. This would allow for a remote keypad outside of the facility.
2. Hard Wire voltage output to indicate host is Armed or Disarmed. This can then be reviewed by the individual outside of the facility.
3. Hard Wire Normally Closed loop. This would provide for protecting devices a long way from the host, as the RF signal is limited in distance.
4, Ability to Delay one Zone (30 seconds) for designated entrance to the facility. This would allow for the disarming at the host keypad by an authorized person without the alarm trigger.
5. Also, you sell card readers. It would be of great advantage if these would interface with the alarms so that an authorized individual could disarm the alarm and open the passage lock with his card. Is that available.
6. come with a back mounting plate
7. They do not want to use a key fob remote to disarm the alarms. They wish to use the host keypad. |
